Search:

I believe the pricing on the website includes shipping. If you are in the USA you may have to email as we normally do not advertise selling anything in the US as we leave this for You guys to take...

http://www.everlastwelders.ca/wp-17-18-26-tig-torch-consumables/wp-17-18-26-stubby-tig-kit.php
This is the kit we supply including the tungsten sizes for the stubby kit
We also have a few other...

http://m.youtube.com/watch?v=b92x0GRwjxU

I was not happy with the initial settings for the easy start menu for both AC and DC . Here we finally had the programming so the finish weld time and...

Actually if you go to the Everlast Canada site you will find a stubby kit that includes a good selection of tungsten for $ 45.00
Cheers
Duncan

First I just want to thank the well wishers for our newest family member that I hope to be meeting in person within the next few days.
Nick jean is her usual self and is on top of everything as is...

For anyone interested these are the specs we are working on for the 255ext
Finalized version will be shipped here for final evaluation .but so far everything is performing as hoped for with some...

We will be introducing a new PowerPro 164 with this production run. Based along the same lines as our PowerTig 185 the 164 has 125 amp output on 110v for both tig and stick and 25 amp plasma on 110v...

100391004010041
Alex has asked me to post up a couple of pictures showing the 255 ext that has been in development over the last several months.
I got a late start on the welder today as I had...

The PowerArc 200st ( dual voltage lift tig )
Has a max operating input of 25.3 amps for 110v and maximum operating input of 23.7 amps on 220v.
We often run them on a 30 amp breaker with no...

Just to clear a few points
The New Power arc 200st is lift tig / stick with dual voltage capability and auto hot start( factory set no adjustment ) it is not supplied with a tig torch as this is...

9875The website designates the D for dual voltage just to distinguish between the 2 models for those that need to see the specs
Please see the spec sheet . Shipment is on board today and will be...

For a limited time we will be offering a WP 17v flex hose tig torch for the new Power Arc 200 dual voltage ( 125 amp output on 110v ) with lift tig and pigtail adaptor for a additional $50.00 on...

With the series of tests that I was doing on this welder over the last week I found very consistent arc starts using a 1/16" 2% thoriated tungsten at 3 amps with a amp draw of . 746 amps
The 2 amp...

The digital series of Welders use this type of HF start that is shown in the Power I-Tig 200T .

I am Back to the factory at the end of the week and will be pretty busy over the next little while . I am particularly looking forward to working on the new DC digital tig that has been mentioned and...

Presently in the pilot arc HF style there are. 4 choices the red handled Panasonic p80 is basically the same as the blue / grey torch that some customers prefer for the 70 / 80 amp although...

As far as the differences between Everlast and Longevity some posts are fairly accurate as far as they go but the real in depth truths would surprise a lot of people. Other posters like to portray...

This kit allows you to use the smaller components normally used for the WP9 - 20 torch series ,with the WP 17 , 18 , 26 . The picture of the two WP 17 torches shows the difference when using the...

From the begining here in Canada I opted to follow the leading Industry standard of 3 years for Warranty. My thought process was simply that if the Leading manufacturers in the USA offered the 3...

New 2013 models have arrived and the first 200 DX is tested and ready to go
Now just have to get of the comp and get testing.
Cheers

That is for the USA in Canada the synergic 200S model is available .

Here is the face and look of the MTS 200S model. As you can see it is full synergic spool gun capable.
Cheers
P.S I think it may even be on sale on some of our local forums we sponsor .

For what ever it might be worth my opinion and actually that of the person who does all the mig unit testing at the factory,the best mig function model to date is the synergic MTS models in the 200...

I just finished clearing the Shipment ( it arrived early ) it is now at the Warehouse but seeing as Monday is a Holiday i will be receiving this order before Noon on Tuesday. I don,t like being so...

Actually this is partly my doing with this bit of confusion. I spoke to Oleg while i was working at the factory the other week and i mentioned to him that some components where being moved from there...