Search:

Whenever you start a thread with inflammatory language and are ignorant of the fact the owner both FLED communism with his family and is Jewish, and title the thread communism/Nazis, insinuating we...

Considering the owner's lineage, it goes to show how crass posts like this can be and why they are deleted. Ignorance of the circumstances making comments like this is a PRIME reason.

For one thing, it's not possible to compare the two exactly unless on a scope because one is analog and the other is digital. There is some difference, but not much. Both are considered advanced...

Kempy,
ALL our units are the equivalent of 'Advanced' square wave. It simply means it's a truer square wave, not as soft.

If you are welding a crack, on an aluminum rim, may be creating a time bomb as it could reform, esecially if you are just trying to weld over the old crack without any joint prep. What you probably...

About the 255 ext. Most if not all of the first production run is spoken for. Production will be ramped up slowly. Demand is high.
The 250ex has all the features that you could want and more...

Rambozo has you on the right track. We also have the 225lx which is going to make its rebooted appearance soon with a generous pulse setting.

It will have the Chinese pedal that is current use. There is a very limited pool of factories that make a foot pedal in China. The SSC pedal is available as an upgrade.

Oleg, are these being...

Here's Tim's latest on the PowerMTS 200, the all NEW version
http://www.youtube.com/watch?v=N1p6NM2PTlQ<a href="http://www.youtube.com/watch?v=N1p6NM2PTlQ" target="_blank">...

Many of them are, but I guess we need a collective area/thread to post them.

As far as welding aluminum goes. It's not cheap. It's about 20-30/lb. And a pound lasts about 15 minutes if you are...

John,
The 7 pin connector is available. The pedal should be the same as the PU. SSC hasn't officially made one available to us for those units, though I am sure they can accommodate the request. ...

It's been scaled down to what we feel are the essential features, but it should be a good starter unit for anybody looking for a nice entry level unit. Should be reliable and tough.

The spool gun is different in the fact that the control is hooked up on the gun. The plug may or may not be different for some. Many of our i-MIGs have the same style plug as the mts. Mine does.

Still got any? I've got an idea for a video. Can't find what I want around here.

No, it should be an 8" 12 lb roll. There is an effort to make it hold that much. Top to bottom end to end there's room, but the width isn't there...yet.

36 amps is the max inrush current. This is a temporary demand. But a 40 amp breaker is not uncommon...most welder circuits are standard wired for 50 amps or more anyway.

I've used vert down many times with 7018 for some fab applications. It makes a nice weld...no weeping sap look. You have to be aware of the slag and watch it to keep it from rolling under, but...

a Z may be a better motion. In some applications, they run vert down with this rod.

No, most boards are plug and play, and what few wires there are, aren't like the array running to the plug. But then if we authorize it, we have weighed the risk.

Yes, you should rebake them. Use your home oven if you need to. A damp rod could possibly cause this issue, but I don't think so because you have one pass that looks better.

A couple of things I...

The new 255ext will take different ohm pedals...but the connector will have to match. I am not sure, but the adapter idea IS the easiest solution. Looks like you have already opened up the welder...

Any change like this will nullify the warranty on the components and related components involved as we can't guarantee the accuracy of the modification or the quality of it. That's not to say it...

Ideally, the added filter will come before the water trap/filter on the rear of the unit...not after.

The whole point of the 60 "S" is to offer the "S"75 torch.

I've used a Speedglas a good bit. The helmet is nice, but I'll stick with Jackson. I don't like the color at all...sort of a turquoise view color...not natural at all. The amber seems more natural...