Search:

I have tried a few torches now and I have really come to like a ck200 with the super flex hoses. I am really kicking myself for not getting the 25' hoses. The hoses and jacket on the everlast torch...

I am sure glad I went with the 330 bottle, 48$ for a fill and 5$ for hazmat

anybody know the size of fitting for the discharge side, I dropped my torch the other day and broke of the end. I tried to get the rest of the brass fitting out but it got so mangled i was not able...

I do odd jobs in odd locations so I have to truck the welder and tank around and it was kind of a pain to keep pulling off the barb fitting. Now since I have posted this I ended up going the other...

I had never tig welded before, and after quite a bit of messing around - I was able to crank out some nice looking aluminum welds that have held up to 6 months of use and abuse on my boat

on a good day I get 30minutes out of a tungston before I dip it in the puddle, it touch it with the rod.

the small torch was a big help - next thing for me is would be some sort of quick disconnect for the argon fitting on the back of the welder

Ray got me the RMA number last time, but then I was passed over to Mike to try and get me going and not have to ship the machine back.

Mike had me also count the wraps on the choke and I already had 10 on mine so we left that alone. I had the option to send it in or Mike could send the chip. This time I am going to send the...

not sure if I have the same problem as the OP, but a few weeks back my 250ex would only give me the HF arc with the foot control. Then talked to Ray and he had me try the torch switch and and seemed...

12" seems kind of long for field dressing - I like a short blade some where about 3" - 4" for working in tight spaces. Plus it folds up and is easy to fit in my pack

Yeah Ray asked a few question, and had it worked out as to what was going on. He said the same thing that continued use would mess things up more, so with that I shut it down and boxed up ready to...

it times I wish - but no I am in Chicago. Pretty sure mine was in the batch with the bad IGBT chips. Talked to Ray and he said it needs to come in for work.

ok switching to the switch on the touch made it so I got a normal arc, but the read out seems to be getting worse now the lowest it will go is 305 amps

when I pressed 207 for support it switched and then just kept ringing. If I turned the dial all the way up it went up to 280 something

I was working doing some work on my duck boat when I ran into a problem. I was only getting the HF arc, it would never ramp up to the full arc. I also noticed that the amps on the display said 205...

Since you only had to use maybe 150-160 amps? if you didnt have the Helium would you have been able to do the weld by flooring the pedal?

1) Done
2) Done
3) Done
4) Done
5) Current post count 271

how about something along the lines of best out of the box thinking use of an everlast product

baby steps man baby steps

as bad as it sounds it looks like they are getting better, I waited a lot longer. Plus from watching the site Mark and Oleg do post up some eta's

Thats how I wired mine up - and I just taped the red wire back so that it can not touch anything

started with 205 ended at 267
project 1, from dgarnier, a racoon skiner
project 2, from dgarnier, a Fish tank rack
project 3, from dgarnier, a Deer Condo
project 4, from dgarnier, a...

Did I overlook one of the rules that we had to do a recap post listing off the projects?

sure wish we has something like this up this way - we just have night class and they are 300$ for the first class that is 4 hours longs 2 night a weeks for 2 weeks with 8 hours of lab time. Which...