PowerTig 200LX - Water Coolers, Mig Welders, Welding Accessories For Sale, 200 Welder


	Power I-Tig 200	PowerTig 185 Micro	PowerTig 200DX	PowerTig 225 LX	PowerTig 250EX	PowerTig 315LX
OUTPUT POWER TYPE	DC	DC/AC	DC/AC	DC/AC	DC/AC	DC/AC
MINIMUM AMP START ON DC/AC	5 A (DC ONLY)	5 A/20 A	5 A/20 A	5 A/20 A	5 A/5 A	10/ 20 A
TIG(GTAW) AMPS/VOLTS @ DUTY CYCLE	200 A, 18 V @ 35% 160 A, 16.4 V @ 60% 130 A, 15.2 V @ 100%	185 A, 17.4 V @ 35% 125 A, 15 V@ 60% 100 A, 14 V @ 100%	200 A, 18 V@ 60% 160 A, 16.4 V @ 100% -	225 A, 19 V @ 60% 175 A, 17 V @ 100% -	250 A, 20 V @ 60% 200 A, 18 V @ 100% -	315 A, 22.6 V @ 60% 250 A, 20 V @ 100% -
TIG OPEN CIRCUIT VOLTAGE (OCV)	70 V	70 V	70 V	70 V	70 V	70 V
STICK (SMAW) AMPS/VOLTS @ DUTY CYCLE	160 A, 26.4 V @ 35% 130 A, 25.2 V @ 60% 100 A, 24 V @ 100%	NO STICK CAPABILITY	160 A, 26.4 V @ 35% 130 A, 25.2 V @ 60% 100 A, 24 V @ 100%	175 A, 27 V @ 35% 135 A, 25.4 V @ 60% 105 A, 24.2 V @ 100%	200 A, 28 V @ 35% 160 A, 26.4 V @ 60 % 130 A, 25.2 V @ 100%	250 A, 30 V @ 35% 200 A, 28 V @ 60% 160 A, 26.4 V
STICK OPEN CIRCUIT VOLTAGE (OCV)	70 V	N/A	70 V	70 V	70 V	70 V
INPUT VOLTAGE/PHASE/Hz	110-120/220-240V 1 PH 50/60 Hz	220-240 V 1 PH 50/60 Hz	220-240 V 1 PH 50/60 Hz	220-240 V 1 PH 50/60 Hz	220-240 V 1/3 PH 50/60 Hz	220-240 3 PH 50/60 Hz
INPUT AMPS MAX INRUSH (I1MAX )@ AVAILABLE VOLTAGE	30 A @ 220 V 28.7 A @ 230 V 27.5 A @ 240 V	24.5 A @ 220 V 23.1 A @ 230 V 22.1 A @ 240 V	33.6 A @ 220 V 32.1 A @ 230 V 30.8 A @ 240 V	39 A @ 220 V 37 A @ 230 V 35 A @ 240 V	45 A/26 A @ 220 V 1/3 PH 43 A/24 A @ 230 V 1/3 PH 40 A/22 A @ 240 V 1/3 PH	32.8 A @ 220 V 31.4 A @ 230 V 30 A @ 240 V
INPUT AMPS MAX RUNNING AMPS (I1EFF )	24 A @ 220 V 23 A @ 230 V 24 A @ 240 V	14.5 A @ 220 V 13.6 A @ 230 V 13 A @ 240 V	27 A @ 220 V 26 A @ 230 V 25 A @ 240 V	31 A @ 220 V 30 A @ 230 V 29 A @ 240 V	36 A/16 A @ 220 V 1/3 PH 34 A/15 A @ 230 V 1/3 PH 32 A/15 A @ 230 V 1/3 PH	25.4 A @ 220 V 24.3 A @ 230 V 23.2 A @ 240 V
APPROX. UNIT WEIGHT (POUNDS)	32	40	59	62	65	105
DIMENSIONS (WxLxH)	7.25"x16.25"x12.75"	7.25"x19"x12.75"	9"x21"x17"	9"X21"x17"	9"x21"x17"	-
FEATURES
FOOT PEDAL	YES/ OVERIDES PANEL AMPS WITH FULL RANGE OF AMPS AVAILABLE AT PEDAL. NO LIMIT (SUBJECT TO CHANGE. CONSULT EVERLAST.)	YES/OVERIDES PANEL AMPS WITH FULL RANGE OF AMPS AVAILABLE AT PEDAL. NO LIMIT (SUBJECT TO CHANGE. CONSULT EVERLAST)	YES/OVERIDES PANEL AMPS. SET/LIMIT MAX AVAILABLE AMPS ON WITH KNOB ON PEDAL.	YES/ SET MAX AVAILABLE AMPS WITH PANEL AMP KNOB.	YES/ SET MAX AVAILABLE AMPS WITH PANEL AMP KNOB.	YES/ OVERIDES PANEL AMPS SET/LIMIT MAX AVAILABLE AMPS WITH KNOB ON PEDAL.
STICK ARC FORCE CONTROL	YES	N/A	NO	NO	YES	YES
LIFT START TIG	YES	NO	YES	YES	YES	YES
HF START TIG	YES	YES	YES	YES	YES	YES
SPOT TIMER	NO	NO	NO	NO	0-10 SECONDS	NO
2T/4T TORCH TRIGGER PANEL CONTROL	YES	2T OR PEDAL ONLY	YES	YES	YES	YES
START AMPS (2T/4T TRIGGER FUNCTION)	NO,FIXED	NO	NO, FIXED	NO, FIXED	5-100 A	NO, FIXED
END AMPS (2T/4T TRIGGER FUNCTION)	NO, FIXED	NO	NO, FIXED	NO, FIXED	5-100 A	NO, FIXED
UP SLOPE (2T/4T TRIGGER FUNCTION)	0-5 SECONDS	NO	NO	0-10 SECONDS	0-10 SECONDS	0-15 SECONDS
DOWN SLOPE (2T/4T TRIGGER FUNCTION)	0-5 SECONDS	NO	0-5 SECONDS	0-10 SECONDS	0-10 SECONDS	0-30 SECONDS
PRE FLOW (GAS)	0-5 SECONDS	FIXED .3 SECONDS	FIXED .3 SECONDS	0-10 SECONDS	0-10 SECONDS	0-10 SECONDS
POST FLOW(GAS)	0-25 SECONDS	FIXED 2-3 SECONDS	0-25 SECONDS	0-25 SECONDS	0-25 SECONDS	0-10 SECONDS
TIG AC FUNCTIONS
AC FREQUENCY CONTROL	NO AC CAPABILITY	20-250 Hz	20-250 Hz	20-250 Hz	20-250 Hz	20- 500 Hz
AC BALANCE CONTROL	NO AC CAPABILITY	10-90%	30-70%	30-70%	10-90%	10-90%
TIG PULSE FUNCTIONS
PULSE FREQUENCY RANGE	.2-250 Hz	NO PULSE FUNCTION	.2-25 Hz	.2-25 Hz	. 2-500 Hz	.2-750 Hz
PULSE AMP CONTROL	RATIO CONTROLLED: 5-95% OF WELDING AMPS -	NO PULSE FUNCTION	DIRECT AMP CONTROL	RATIO CONTROLLED: 5-95% OF WELDING AMPS -	RATIO CONTROLLED: 5-95% OF WELDING AMPS	DIRECT AMP CONTROL
PULSE TIME ON (WIDTH)	RATIO CONTROLLED: 10-90% OF PULSE CYCLE	NO PULSE FUNCTION	RATIO CONTROLLED 10-90% OF PULSE CYCLE	RATIO CONTROLLED 10-90% OF PULSE CYCLE	RATIO CONTROLLED 10-90% OF PULSE CYCLE	RATIO CONTROLLED 10-90 % OF PULSE CYCLE
* DIRECT AMP CONTROL WORKS DIFFERENTLY WITH THE FOOT PEDAL THAN RATIO CONTROLLED UNITS. WHEN USING THE FOOT PEDAL AND PULSE TOGETHER ON DIRECT AMP CONTROL PULSE UNITS, THE PEDAL WILL ONLY CONTROL THE MAIN AMP (BASE AMPS) VALUE. THE PULSE AMPS WILL REMAIN FIXED. INCREASING PEDAL TRAVEL WILL DECREASE PULSE AMP DIFFERENTIAL.

PowerTig 200LX: