|
|
Mig Welding: |
|
new products
Power I-MIG 160
Convenient and portable, this unit can go any where to get to the repair. With a 12 lb roll capacity, this unit will not keep you running back for more wire. Ideal for Flux core with optional drive rolls. Need to weld Aluminum? No problem. Just add the optional spool gun and your are good to go. Don't forget about the standard 100 amp stick weld feature with arc force control, good for 3/32 and 1/8" rods. |
| |
Power I-IMIG 250P
Everlast is breaking down the barriers to create the industries first affordable pulse MIG machine. With its inverter power, the pulse MIG provides stable arc characteristics needed for pulse MIG operation. Fully adjustable parameters are key features of the pulse cycle. Burn back and arc force controls offer added features for quality welds. Truly in a class of its own, the Power I-MIG 250 P opens the door wide open to the world of pulse mig welding |
|
|
| |
Mig Welder |
|
Inverter Type |
|
Processes |
|
Input Voltage/Phase |
|
Output Amps @ Rated Duty Cycle |
|
Rated Max Volts |
|
Roll Size |
|
Standard Wire Diameter |
|
Spool Gun Ready |
|
Recommended Maximum Metal Thickness single pass |
|
Typical Use |
|
|
Power I-MIG 160 |
|
IGBT |
|
GMAW/
SMAW |
|
120/240V
1 Phase |
|
135A @ 35% |
|
22V @ 160A |
|
2-12 lbs |
|
.030-.045" |
|
YES |
|
5/16" |
|
Hobbyists, Automotive, HVAC, General Repair, Fabrication |
|
| Power I-MIG 200 |
|
IGBT |
|
GMAW/
SMAW |
|
120/240V
1 Phase |
|
160A @ 35% |
|
24V @ 200A |
|
2-12 lbs |
|
.030-.045" |
|
YES |
|
3/8" |
|
Hobbyists, Automotive, HVAC, Light Industrial, Fabrication, Motorsports, General Repair, Agricultural |
|
|
|
Power I-MIG 205 |
|
IGBT |
|
GMAW/
SMAW |
|
240V
1 Phase |
|
200A @ 35% |
|
25V @ 215A |
|
30-44 lbs |
|
.030-.045" |
|
YES |
|
1/2" |
|
Automotive, HVAC, Industrial, Commercial, Fabrication, Motorsports, General Repair, Maintenance, Agricultural |
|
| Power I-MIG 205 p |
|
IGBT |
|
GMAW-P/
SMAW |
|
240V
1 Phase |
|
200A @ 35% |
|
24V @ 200A |
|
30-44 lbs |
|
.030-.045" |
|
YES |
|
1/2" |
|
Automotive, Industrial, Fabrication, Motorsports, General Repair, Maintenance, Agricultural |
|
|
|
Power I-MIG 250 p |
|
IGBT |
|
GMAW-P/
SMAW |
|
240V
1 Phase |
|
250A @ 35% |
|
26.5V @ 250A |
|
30-44 lbs |
|
.030-.045" |
|
YES |
|
1/2" |
|
Automotive, Industrial, Commercial Fabrication, Motorsports, General Repair, Maintenance, Agricultural |
|
|
EVERLAST offers a variety of MIG Welders such as: the Power I-MIG 160, Power I-MIG 200, Power I-MIG 205 and Power I-MIG 250 p.
Power I-MIG 160 is ideal for hobbyists, automotive, HVAC, general repair, and fabrication works. The recommended maximum metal thickness single pass is 5/16" and the standard wire diameter is 0.30-.045".
Power I-MIG 200 is also ideal for hobbyists, automotive, HVAC, light industrial, fabrication, motorsports, general repair and agricultural works. The Input Voltage/Phase need for this is 240V 1phase *120/240 V optional. The recommended maximum metal thickness single pass is 3/8" and the standard wire diameter is 0.30-.045".[read more...]
EVERLAST offers a variety of MIG Welders such as: the Power I-MIG 160, Power I-MIG 200, Power I-MIG 205 and Power I-MIG 250 p.
Power I-MIG 160 is ideal for hobbyists, automotive, HVAC, general repair, and fabrication works. The recommended maximum metal thickness single pass is 5/16" and the standard wire diameter is 0.30-.045".
Power I-MIG 200 is also ideal for hobbyists, automotive, HVAC, light industrial, fabrication, motorsports, general repair and agricultural works. The Input Voltage/Phase need for this is 240V 1phase *120/240 V optional. The recommended maximum metal thickness single pass is 3/8" and the standard wire diameter is 0.30-.045".
Power I-MIG 205 is suitable for automotive, HVAC, industrial, commercial, fabrication, motorsports, general repair, maintenance and agricultural purposes. The Input Voltage/Phase need for this is 240V 1phase. The recommended maximum metal thickness single pass is 1/2" and the standard wire diameter is 0.30-.045".
Power I-MIG 250P is for automotive, industrial, commercial fabrication, motorsports, general repair, maintenance and agricultural purposes. The recommended maximum metal thickness single pass is 1/2"and the standard wire diameter is 0.30-0.40".
EVERLAST offers standard features like precise digital display for voltage and wire speed. Both the Power I-MIG 160 and Power I-MIG 200 have arc force control, digital display, spool gun capability, and even a stick weld feature that can double for a scratch start TIG welder. The larger Power I-MIG 250 P is a pulse MIG machine with up to 250 Hz pulse capability, with easy adjustment and complete control over the pulse cycle. The heavy duty 2 and 4 geared roller designs of the Power I-MIG feature cast aluminum housings with steel drive rollers, with different sizes and groove rollers available to feed steel, flux core, or aluminum wire. All of this MIG welding equipment offers the best product performance in the industry at a surprisingly low cost. [Collapse...]
|
|
