PowerPlasma 60C - Foot pedal, Plasma Cutting Machines, Diesel Generators, 175 Welder

DEALERS WANTED | Terms & Policy

Home

Welders Home Plasma Cutters PowerPlasma 60C
PowerPlasma 60C:

SuperCut and PowerPlasma Series: Inverter Plasma Cutter
Process: PAC/CNC
Models in this class: SuperCut 40, 50; PowerPlasma 50,60,60C
70,80,100

PowerPlasma 60C

Features & Benefits
- High Voltage/Inductor Start is excellent choice for CNC operation with the fastest pierce times. This is different than HF starting as the frequency is lower, reducing the risk of interference associated with typical HF/HV starts.
- Cuts virtually any type of metal with ease.
- Unit comes standard with Trafimet P 81 machine torch.
- High duty cycle @ 60 % of rated amperage capacity.
- Clean, and rapid cuts on most metals.
- Built in CNC socket with OK to move, arc voltage divider, torch height controller etc.
- Front air pressure adjustment makes adjusting pressure simple and easy.
- Front air pressure gauge allows quick verification of air pressure.
- Over Current and Air Pressure light indicators keep you updated on your units operating condition and interrupts cutting should an event occur.
-Central euro connector allows use of different Trafimet torches.
-Features Trafimet P-81 machine/CNC torch with 25 ft cable.

Make an offer for PowerPlasma 60C

Price : $1200.00

View our plasmacutter powerplasma products
plasmacutter powerplasma specification Download
Know more by using plasmacutter powerplasma manual

Recommended Areas Of Use
- CNC
- Track torch
- General fabrication

Standard Equipment
- Trafimet P-81 machine torchTorch
- Consumable starter kit
- Water trap/filter
- Air pressure gauge

Optional Equipment
- Welding helmet
with special 7 shade for plasma cutting
- Consumable Kit
- Welding cart
- Trafimet A 81 torch ( slight modification of the torch may required for compatability)

Recommended Metals
Virtually all metals


	PowerPlasma 50	PowerPlasma 60	PowerPlasma 60C	PowerPlasma 70	PowerPlasma 80	PowerPlasma 100
IDEAL FOR REGULARLY CUTTING A MAXIMUM OF	1/2" (1/4" CNC CONSTANT USE)	5/8"	7/16" (CNC use)	3/4"	1"	1"
MAXIMUM CUT FOR QUALITY @ 10-12 IPM (STEEL)	3/4"	1"	7/8"	1 1/8"	1 1/4"	1 1/2"
MAXIMUM SEVERANCE CUT (STEEL)	1"	1 1/4" (WITH OPT A 81 TORCH)	1 1/8"	1 3/8" (WITH OPT A 81 TORCH)	1 1/2" (WITH OPT A81 TORCH)	1 7/8"
OUTPUT AMP/VOLT RANGE	20 A/88 V-50 A/100 V	20 A/88 V-60 A/108 V	20 A/88 V-60 A/104 V	20/88V-70 A/110V	20/88 V-80 A/112 V	20/88 V-100 A/120 V
START TYPE	CONTACT/BLOWBACK	HIGH FREQUENCY	HIGH VOLTAGE/LOW FREQUENCY	HIGH FREQUENCY	HIGH FREQUENCY	HIGH FREQUENCY
PILOT ARC	YES	YES	YES	YES	YES	YES
CNC CAPABILITY	GOOD( USER MUST SUPPLY SEPARATE CNC TORCH OR USE EXISTING HAND TORCH)	FAIR (MUST SHIELD CABLES, UNIT SUPPLIED ONLY WITH HAND TORCH)	EXCELLENT (CNC/TRACK TORCH SUPPLIED AS STANDARD TORCH)	FAIR (MUST SHIELD CABLES, UNIT SUPPLIED ONLY WITH HAND TORCH)	FAIR (MUST SHIELD CABLES, UNIT SUPPLIED ONLY WITH HAND TORCH)	(CHECK FOR UPDATES)
TORCH TYPE	S-45	AG60 (TRAFIMET A81 OPTIONAL/RECOMMENDED)	P81 TRAFIMET MACHINE TORCH STANDARD	P-80 (TRAFIMET A81 OPTIONAL/RECOMMENDED)	P-80 (TRAFIMET A81 OPTIONAL/RECOMMENDED)	TRAFIMET A101
CNC PORT	YES	YES	YES	YES	YES	NO
GOUGING CAPABILITY	LIMITED (MUST USE EXTENDED TRAFIMET TORCH CONSUMABLES AVAILABLE FROM TRAFIMET RETAIL DEALERS FOR LIMITED/LIGHT DUTY GOUGING)	FAIR (MUST USE OPTIONAL A81 TRAFIMET TORCH AND PURCHASE GOUGING CONSUMABLES FROM TRAFIMET RETAIL DEALERS)	NONE (AS EQUIPPED WITH STANDARD MACHINE TORCH)	FAIR (MUST USE OPTIONAL A81 TRAFIMET TORCH WITH GOUGING CONSUMABLES AVAILABLE FROM TRAFIMET RETAIL DEALERS)	FAIR (MUST USE OPTIONAL A81 TRAFIMET TORCH WITH GOUGING CONSUMABLES AVAILABLE FROM TRAFIMET RETAIL DEALERS)	GOOD (MUST USE TRAFIMET TORCH GOUGING CONSUMABLES AVAILABLE FROM TRAFIMET RETAIL DEALERS)
INPUT VOLTAGE/PHASE	220-240 V 1 PH 50/60 Hz	220-240 V 1 PH 50/60 Hz	220-240 V 3 PH 50/60 Hz	220-240 V 1 PH 50/60 Hz	220-240 V 1 PH	220-240 V 1/3 PH
MAX INRUSH AMPS@RATED VOLTAGE	220 V @ 39 A/240 V @ 37 A	220V @ 50 A/240 V @ 46 A	220 V @ 28.9 A/240 @ 27 A	220 @ 60 A/ 240 V @ 55 A	220 V @ 70 A/ 240 @ 64 A	220 V (3) @ 45 A/240 V (3) @ 40 A
MAX RUNNING AMPS @ RATED VOLTAGE	220 V @ 31 A/240 V @ 29 A	220 V @ 40 A/240V @ 36 A	220 V @ 23 A/240 V @ 21 A	220 V @ 47 A/ 240 V @ 44 A	220 V @ 55 A/240 V @ 51 A	220 V (3) @ 35 A/240 V (3) @ 31 A
OPEN CIRCUIT VOLTAGE (OCV)	200 V	200 V	200 V	200 V	200 V	230 V
ADJUSTABLE POST FLOW TIMER	YES 0-60 S/CONSTANT FLOW	YES 0-60 S/CONSTANT FLOW	FIXED/CONSTANT FLOW	YES 0-60S/CONSTANT FLOW	YES 0-60 S/CONSTANT FLOW	FIXED/CONSTANT FLOW
AMPS/VOLTS @ 60% DUTY CYCLE (10 MIN)	50 A/100 V	60 A/ 108 V	60 A/104 V	70 A/ 110 V	80 A/ 112 V	100 A/ 120 V
AMPS/VOLTS @ 100% DUTY CYCLE (10 MIN)	40A/96 V	46.5 A/98.6 V	46.5 A/ 98.6 V	55 A/ 102 V	63 A/ 105 V	80 A/ 112 V
RECOMMENDED OPERATING AIR PRESSURE	55-65 PSI	55-65 PSI	55/65 PSI	55/70 PSI	55/70 PSI	55/70 PSI
RECOMMENDED COMPRESSOR CAPACITY	4 CFM@ 90PSI/15 GALLON	5 CFM@ 90PSI/20 GALLON	9 CFM@ 90PSI/ 60 GALLON	6 CFM@ 90 PSI/ 30 GALLON	6 CFM @ 90 PSI/ 30-60 GALLON	8 CFM @ 90 PSI/ 60 GALLON
OVERCURRENT/DUTY CYCLE WARNING-INTERRUPT	YES	YES	YES	YES	YES	YES
LOW AIR PRESSURE CUT-OUT	YES	YES	YES	YES	YES	YES

EVERLAST has an exceptional line of Power Plasma cutters that deliver high quality results, with 50-100 amps in 1 and 3 phase designs.

Each model comes ready to cut, with water trap, air connection, extra consumables and lengthy power cord. You supply the air compressor, air line and the power plug.

If you need to cut aluminum, stainless, or steel, the pilot arc technology or power arc welders offer consistent cuts. These products also excel at cutting expanded metal quickly without the delay of having to restart the arc.

Commercial duty cycles of 60% at maximum amperage allow you to keep cutting for extended periods of time without stopping or taking cool down breaks. If you do overextend the duty cycle, the unit has over-current/ overheat protection to prevent costly failures.[read more...]

While welding is a valuable skill to possess, it is important to get the right machine to do the job. If you are a professional or a hobbyist and are trying to find the machine to fit your needs, Everlast can help. We offer a full line of welders for the hobbyist and professionals, including MIG, TIG, STICK and plasma cutters. We are proud to feature IGBT components and modules from Siemens for long life service whether in the field, in the shop or in the home. Don't forget about our line of silent diesel generators and engine drive welders. We offer convenient ordering capability without leaving your home or office.

PowerPlasma 60C: